Future releases get:
- A 'Checksums' section appended to the release body with sha256sum -c
-compatible 'HASH filename' lines for each .uf2 attached
- A SHA256SUMS.txt file uploaded alongside the .uf2 artifacts so users
can verify with 'sha256sum -c SHA256SUMS.txt' after downloading
Web-config flasher already compares this against its own SHA-256 on the
'Use latest release' path, but the hashes on the release page let people
manually verify the bundled site UF2 too.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds a repository_dispatch step to the release workflow that pings the
DS5Dongle-OLED-Config-Web repo with event-type 'firmware-released' after
the UF2s are uploaded. The web repo's deploy.yml listens for that event
and re-runs its build, which re-fetches the latest release UF2 and
bundles it into the GH Pages site.
Requires a fine-grained PAT stored as WEB_REPO_DISPATCH_PAT secret on
this repo, scoped to:
- Repository: MarcelineVPQ/DS5Dongle-OLED-Config-Web
- Permissions: Actions: Write, Metadata: Read
If the secret isn't set, the step fails 401 and continue-on-error
swallows it — release upload still succeeds.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Build-system, config, usb, and CI wiring on top of upstream's
v0.6.0-hotfix tree. Build will still fail until Phase C+D land bt.h
accessors that oled.cpp references; that's expected mid-rebase.
CMakeLists.txt: add src/oled.cpp + src/slots.cpp to add_executable,
link hardware_spi, restore OUTPUT_NAME ds5-bridge-oled.
src/config.h: append the 4 OLED Edition Config_body fields
(current_slot + auto_haptics_enable/gain/lowpass). Preserves
upstream's field order for the first 8 fields.
src/config.cpp:
- speaker_volume validity default -100 dB → 0 dB (footgun fix)
- 4 new validity guards for the appended fields with sensible
defaults (Fallback / 100 % / 160 Hz / slot 0)
- config_default() impl (was declared in upstream's config.h since
v0.5.4 but never defined; the OLED Edition's "Reset to defaults"
Settings item calls it)
src/usb.cpp: drop the UAC1 SET_CUR Volume → flash-config sync that
let PipeWire/Pulse silently override the user's saved Spk Vol on
every device reconnect. Borrowed from loteran/DS5Dongle commit
03fa1e4.
src/usb_descriptors.cpp: restore iSerialNumber = STRID_SERIAL.
Upstream's commit e79c762 zeroed it to work around SpecialK (#32),
but that broke Windows device identity (#100) — users lost
per-device volume / app preferences when moving USB ports. The
OLED Edition prioritizes Windows device-identity stability for
the broader user base over SpecialK compat for a narrower one.
.github/workflows/{build,release}.yml: artifact filenames use
ds5-bridge-oled.uf2 (and -debug / -picow variants) per the
OUTPUT_NAME rebrand.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Blink the Pico onboard LED at 1 Hz when the connected DualSense
reports PowerPercent <= 1 (i.e. <= 10%) and PowerState == Discharging.
Source data is byte 52 of the BT 0x31 input report, already copied
into interrupt_in_data; no new BT parsing required.
The new module owns the LED only while it is actively blinking; it
detects controller disconnection via stale-report timeout and steps
out, so bt.cpp's existing connect/disconnect LED handling stays in
charge in all other states. Honors disable_pico_led.
Gated by -DENABLE_BATT_LED=ON (default). With the option off, the
source file is not compiled and behavior is identical to upstream.
CI gains a compile-only check for the OFF flavor.
(cherry picked from commit 2f8ea73c9fb695e24e7cc3329db7cb925e82e1c9)
