From d5daf2ee9fb7d95f940a6435c538f55113625fac Mon Sep 17 00:00:00 2001
From: awalol <awalolcn@gmail.com>
Date: Wed, 29 Apr 2026 00:05:21 +0800
Subject: [PATCH] update README.EN.md. Thanks @winkywong1998

---
 README.EN.md | 109 +++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 85 insertions(+), 24 deletions(-)

diff --git a/README.EN.md b/README.EN.md
index 1841ca6..f590356 100644
--- a/README.EN.md
+++ b/README.EN.md
@@ -1,33 +1,94 @@
 # Pico2W DualSense 5 Bridge
+
 [中文](./README.md)
-> Turn the Pico2W into a wireless adapter for the DS5 controller
 
-# Features
-- Supports HD Haptics
+> Turn a Raspberry Pi Pico2W into a wireless adapter for the DualSense (DS5) controller.
 
-# Usage
-1. Hold down the BOOTSEL button on the Pico to enter flashing mode
-2. Drag the `.uf2` file onto it
-3. Put the DS5 controller into Bluetooth pairing mode
-4. Enjoy it
+## Overview
 
-- Adjusting the microphone volume changes the haptic gain multiplier, range: [1, 2]
-- Enabling speaker mute disables the LED connection indicator (takes effect after the controller reconnects)
-- Enabling microphone mute disables silent disconnection
-- The device will only appear in the system after the controller is connected to the Pico
+This project enables the Raspberry Pi Pico2W to function as a Bluetooth bridge for the DualSense controller, allowing wireless connectivity with enhanced haptics support.
 
-# Current Issues
-- Audio may have slight stuttering
-- Due to encoding requirements, the Pico needs to be overclocked. The current settings are 1.2V and 270MHz. In my own testing, the maximum stable frequency was 270MHz, with good results.
-- If your Pico cannot boot with these overclocking settings, increase the voltage or lower the frequency yourself
+## Features
 
-# Future Plans
+- 🎮 Full DualSense connectivity via Pico2W
+- 🔊 Supports HD haptics (advanced vibration feedback)
+- 📡 Wireless Bluetooth bridging
+- ⚙️ Adjustable haptic gain via microphone volume
+- 🔕 Configurable LED and disconnection behaviors
 
-# Build
-You need to upgrade the TinyUSB version in the Pico SDK to the latest version
+## Getting Started
 
-# Citation
-- [rafaelvaloto/Pico_W-Dualsense](https://github.com/rafaelvaloto/Pico_W-Dualsense) - Inspiration for this project
-- [egormanga/SAxense](https://github.com/egormanga/SAxense) - Haptics reports
-- [https://controllers.fandom.com/wiki/Sony_DualSense](https://controllers.fandom.com/wiki/Sony_DualSense) - Data report structure
-- [Paliverse/DualSenseX](https://github.com/Paliverse/DualSenseX) - Speaker packet reports
\ No newline at end of file
+### Flashing Firmware
+
+1. Hold the BOOTSEL button on the Pico2W
+2. Connect the Pico2W to your computer via USB
+3. The device will mount as a USB storage device
+4. Drag and drop the .uf2 firmware file onto the device
+
+### Pairing the Controller
+
+1. Put the DualSense controller into Bluetooth pairing mode
+2. Wait for the Pico2W to detect and connect
+3. Once connected, the device will appear on the host system
+
+## Configuration
+
+The following controller settings are repurposed:
+
+### Microphone volume
+
+Controls haptic gain multiplier
+
+Range: [1.0 – 2.0]
+
+### Speaker mute
+
+Disables LED connection indicator
+
+Takes effect after controller reconnects
+
+### Microphone mute
+
+Disables silent disconnection behavior
+
+## Notes
+
+The Pico device will only be visible to the system after the controller is connected
+
+Some behaviors depend on reconnection cycles to take effect
+
+## Known Issues
+
+- ⚠️ Audio may experience slight stuttering
+- ⚠️ Overclocking is required for proper performance
+
+## Performance / Overclocking
+
+Due to encoding requirements, the Pico2W must be overclocked:
+
+Current settings:
+
+- Voltage: 1.2V
+- Frequency: 320 MHz
+
+If your device fails to boot:
+
+- Increase voltage slightly or Reduce CPU frequency
+
+## Build Instructions
+
+To build the project from source:
+
+1. Update TinyUSB in the Pico SDK to the latest version
+2. Compile using standard Pico SDK toolchain
+
+## Roadmap
+
+- Improve audio stability
+
+## References
+
+- [rafaelvaloto/Pico_W-Dualsense](https://github.com/rafaelvaloto/Pico_W-Dualsense) — Project inspiration
+- [egormanga/SAxense](https://github.com/egormanga/SAxense) — Bluetooth Haptics POC
+- [https://controllers.fandom.com/wiki/Sony_DualSense](https://controllers.fandom.com/wiki/Sony_DualSense) - DualSense data report structure documentation
+- [Paliverse/DualSenseX](https://github.com/Paliverse/DualSenseX) — Speaker report packet
\ No newline at end of file