From b1019fb5c2f2e2e4281cff25b78aa1cf1fdf6243 Mon Sep 17 00:00:00 2001
From: awalol <awalolcn@gmail.com>
Date: Sun, 17 May 2026 14:59:54 +0800
Subject: [PATCH] update README

---
 README.CN.md | 26 ++++++++++++++++++++++----
 README.md    | 39 ++++++++++++++++++++-------------------
 2 files changed, 42 insertions(+), 23 deletions(-)

diff --git a/README.CN.md b/README.CN.md
index 3e83f53..6eb59a8 100644
--- a/README.CN.md
+++ b/README.CN.md
@@ -11,16 +11,34 @@
 3. 将 DS5 手柄进入蓝牙配对模式
 4. Enjoy it
 
-- 调整麦克风音量为改变震动增益倍数，范围 [1,2]
-- 开启扬声器静音为关闭LED连接提示 (手柄重连后生效)
-- 开启麦克风静音为禁用静默断连
+***你可能需要在控制器处于匹配模式时重新插拔 pico***
+
 - 手柄连接到pico以后，系统才会显示设备
 
+# Pico 配置调整
+你可以通过网页调整Pico的内部设置
+
+- 用于正式固件: https://ds5.awalol.eu.org
+- 用于测试固件: https://ds5-dev.awalol.eu.org
+
+### Pico W 版本
+
+Pico W 由于性能问题，只能支持震动，不支持扬声器。
+你可以通过开启 `-DPICO_W_BUILD=ON` 编译项去开启 Pico W 固件编译，或者在 Github Action 下载预编译的固件
+
+### USB 唤醒支持
+这是一项实验性的功能。如果你需要该功能，请前往 feat/usb-wake 分支进行编译，或者使用该分支对应的 Github Action 预编译固件。`ds5-bridge-wake.uf2` 为该功能的固件
+
+极为建议在使用该功能前阅读  #60 和 #61
+
+### 社区分支
+https://github.com/MarcelineVPQ/DS5Dongle-OLED-Edition
+https://github.com/zurce/DS5Dongle-OLED
+
 # 当前问题:
 - 声音可能有点小卡顿
 - 由于编码需要，需要对pico进行超频，当前的参数是1.2V 320MHz。
 - 若您的pico使用该超频参数无法启动，请自行增加电压或者降低频率
-- 在 Linux 扬声器不工作
 
 # 未来计划
 请查看[DS5Dongle plan](https://github.com/users/awalol/projects/5)
diff --git a/README.md b/README.md
index 3e29bbd..1686dd0 100644
--- a/README.md
+++ b/README.md
@@ -13,8 +13,6 @@ This project enables the Raspberry Pi Pico2W to function as a Bluetooth bridge f
 - 🎮 Full DualSense connectivity via Pico2W
 - 🔊 Supports HD haptics (advanced vibration feedback)
 - 📡 Wireless Bluetooth bridging
-- ⚙️ Adjustable haptic gain via microphone volume
-- 🔕 Configurable LED and disconnection behaviors
 
 ## Getting Started
 
@@ -31,25 +29,14 @@ This project enables the Raspberry Pi Pico2W to function as a Bluetooth bridge f
 2. Wait for the Pico2W to detect and connect
 3. Once connected, the device will appear on the host system
 
+***You may need to replug the Pico when the controller is in pairing mode.***
+
 ## Configuration
 
-The following controller settings are repurposed:
+You can modify the Pico settings via the web config.
 
-### Microphone volume
-
-Controls haptic gain multiplier
-
-Range: [1.0 – 2.0]
-
-### Speaker mute
-
-Disables LED connection indicator
-
-Takes effect after controller reconnects
-
-### Microphone mute
-
-Disables silent disconnection behavior
+- For release: https://ds5.awalol.eu.org
+- For development: https://ds5-dev.awalol.eu.org
 
 ## Notes
 
@@ -63,6 +50,20 @@ When the connected DualSense reports its battery at or below 10% (and it is not
 
 To opt out at build time, configure with `-DENABLE_BATT_LED=OFF`. Default is ON.
 
+### Pico W Version
+
+Pico W only has haptics support, no speaker. You can enable Pico W firmware compilation with `-DPICO_W_BUILD=ON`, or download precompiled firmware from GitHub Actions.
+
+### USB Wake Feature
+
+This feature is experimental. If you need this functionality, please check out the feat/usb-wake branch to compile it, or use the precompiled firmware from GitHub Actions under that branch. The `ds5-bridge-wake.uf2` is the firmware with this feature enabled.
+
+It is recommended to read #60 and #61 before using this feature.
+
+### Community Fork
+https://github.com/MarcelineVPQ/DS5Dongle-OLED-Edition
+https://github.com/zurce/DS5Dongle-OLED
+
 ## Known Issues
 
 - ⚠️ Audio may experience slight stuttering
@@ -85,7 +86,7 @@ If your device fails to boot:
 
 To build the project from source:
 
-1. Update TinyUSB in the Pico SDK to the latest version
+1. ***Update TinyUSB in the Pico SDK to the latest version***
 2. Compile using standard Pico SDK toolchain
 
 ## Roadmap